A new layer of paint can do wonders for any home, outside, and inside. If you want to ensure that the job is done properly and to prevent experiencing the stress that comes with painting jobs, then you can feel free to employ professional painters in Fort Collins. However, if you’re planning to make this project a DIY one, it would best if you know the typical mistakes that most people do when they are painting that you need to avoid as much as possible.
Failing to Use Primer
Primer provides prepares your surface, which can help the paint to adhere more on the surface. Moreover, it helps enhance the look of the newly coated paint. Primer is particularly vital when you’re planning to paint over darker, different colors or when you can observe stains on the wall.
Painting on rotten wood
If you have rotting wood, keep in mind that coating it with fresh paint will never be a solution for that. Instead, the wood must be replaced before you paint it. The flaws found in walls must also be patched up with the compound. Then, provide some more time for the compound to be totally dry. Or else, it can spoil how your paint job will appear.
Painting a Wet Surface
Painting a dry surface is key. Hence, after you washed the walls, make sure to leave enough time for them to dry thoroughly. When it comes to humid weather, it would be best to let the drying process time be longer. Some of the painting issues you could have if you paint on a wet surface include blistering and peeling of the paint.
Painting the ceiling last
If you plan to paint the walls and the ceiling, make sure to paint the ceiling first. Or else, there’ll be a huge possibility that you can spoil the new paint job on the walls with paint drips from the ceiling.
Leaving your fixtures bare open
Other than the surface you want to paint on, make sure to cover light fixtures, doorknobs, and anything else in your room before painting. The last thing you want to get is to wind up having your wall plates or doorknobs splotched with paint.
Not using tape
You need to apply tape on all areas that need to have clean edges, like door frames, windowsills, etc. If you don’t do so, you’ll most likely wind up having a poorly done paint job.
Painting on unprepared surfaces
Before applying a new paint coat, it’s important to scrape all the glossy surfaces and remove the peeling and flaking paint. If you fail to do this, the paint won’t stick well. As a result, it won’t give off the best coverage.
Painting on soiled surfaces
Before you paint any surfaces like ceilings and/or walls, you have to make sure that you wash them first. The paint stays on and looks better if it’s coated to clean canvass. Even the smallest dust particles can destroy your desired results.